Veloci Hose Reel - Stainless Steel
Veloci's stainless steel hose reels offer a consolidated method for storing your KobraJet hose! These Hose reels are hot water rated up 215°F and boast anti corrosion components with a high performance stainless swivel. Hardware is not included for mounting as this is specific to your mounting requirements.
Instructions:
- • Slide the swivel end of your Kobrajet hose through the opening provided at the side of the reel core and install the 3/8" Male NPT threads into the 3/8" Female NPT threads of the swivel.
- • Do not make a Quick Coupling joint at the swivel as there is not enough space and the bend in the line is too severe. Be sure to allow a small amount of slack at the swivel joint and use the red hose fastener provided to secure the hose at this joint.
- • Using a whip line connected to your pump, connect to the 3/8" Male NPT hose reel inlet. When planning, add an extra foot to the distance of the whip line so as not to bend the whip line too severely.
- • Lastly, install the handle with the hardware provided.
- • Before leaving your hose reel unattended, always engage the locking mechanism on the side of the reel.
| Specifications: |
50ft |
100ft |
| Height |
12.5" |
12.5" |
| Total Width |
11" |
15" |
| Depth |
10.5" |
10.5" |
| Wall Width |
7.5" |
12" |
| Core Width |
4.375" |
8.75" |
| Core Diameter |
4.25" |
4.25" |
| Inlet |
3/8" Male NPT |
3/8" Male NPT |
| Base of Center to Core |
7.5" |
7.5" |
| Mounting Bracket |
4 holes-square - 3.375" to center |
4 holes-square - 3.375" to center |
| Hole Diameter |
0.375" Circle |
0.375" Circle |
| Pin Lock |
Yes |
Yes |
| Mounting Hardware |
None |
None |
| Downloadable Files |
Information Sheet |
Information Sheet |
